14" x 6.5" Multi Wood Stave Free floater Snare Shell
($10.00 shipping)
This shell is designed to fit into a 14" x 8" free floater chassis.
Bearing Edges and Beds
Bearing Edges and Beds
Bearing Edges and Beds
The bearing edge on the top inside of this shell is 30 degrees featuring a slight round over on the outside. The bottom of this shell is cut flat to nest into the free floater chassis.
Satin Lacquer Finish
Bearing Edges and Beds
Bearing Edges and Beds
Resonant Stave Shell
Bearing Edges and Beds
Resonant Stave Shell
This resonant stave snare drum shell features 1/2" milled in re-rings, with the center milled thinner to 1/4" for a wide tuning range
14" x 5" Free Floater Maple Shell
($10.00 shipping)
This shell is designed to fit into a 14" x 6.5" free floater chassis.
Bearing Edge
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
The bearing edge on the top inside of this shell is 30 degrees featuring a slight round over on the outside. The bottom of this shell is cut flat to nest into the free floater chassis.
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
This shell features a nice walnut decorative inlay.
Resonant Stave Shell
Satin Lacquer Finish with a Decorative Inlay
Resonant Stave Shell
This resonant stave shell, designed as a free floater drum shell, features milled in re-rings, with the center milled thinner to 1/4" for a wide tuning range.
14" x 5" Free Floater Sycamore Shell SOLD
($0.00 shipping)
This shell is designed to fit into a 14" x 6.5" free floater chassis.
This shell is sold but I can make another one just like it for you. Please message me.
Bearing Edge
Amber Gold Gloss Polyester Finish
Amber Gold Gloss Polyester Finish
The bearing edge on the top inside of this shell is 30 degrees featuring a slight round over on the outside. The bottom of this shell is cut flat to nest into the free floater chassis.
Amber Gold Gloss Polyester Finish
Amber Gold Gloss Polyester Finish
Amber Gold Gloss Polyester Finish
Resonant Stave Shell
Amber Gold Gloss Polyester Finish
Resonant Stave Shell
This resonant stave shell, designed as a free floater drum shell, features milled in re-rings, with the center milled thinner to 1/4" for a wide tuning range.
14" x 6.5" Free Floater Maple Shell
($10.00 shipping)
This shell is designed to fit into a 14" x 8" free floater chassis.
This shell is sold but I can make another one just like it for you. Please message me.
Bearing Edge
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
The bearing edge on the top inside of this shell is 30 degrees featuring a slight round over on the outside. The bottom of this shell is cut flat to nest into the free floater chassis.
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
This shell features a nice walnut decorative inlay.
Resonant Stave Shell
Satin Lacquer Finish with a Decorative Inlay
Resonant Stave Shell
This resonant stave shell, designed as a free floater drum shell, features milled in re-rings, with the center milled thinner to 1/4" for a wide tuning range.
14" x 5" Free Floater Birdseye Maple Shell
($10.00 shipping)
This shell is designed to fit into a 14" x 6.5" free floater chassis.
This shell is sold but I can make another one just like it for you. Please message me.
Bearing Edge
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
The bearing edge on the top inside of this shell is 30 degrees featuring a slight round over on the outside. The bottom of this shell is cut flat to nest into the free floater chassis.
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
Satin Lacquer Finish with a Decorative Inlay
A nice abalone inlay is featured on this shell.
Resonant Stave Shell
Satin Lacquer Finish with a Decorative Inlay
Resonant Stave Shell
This resonant stave shell, designed as a free floater drum shell, features milled in re-rings, with the center milled thinner to 1/4" for a wide tuning range.